Toshiba EQUIUM M40 Maintenance Manual page 155

4.3 HDD
4. Remove the HDD pack by pulling the HDD tap attached to the HDD pack.
NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or
replace the HDD pack only if it failed.
5. Place the HDD pack on a flat surface (such as a desk), and remove the two M3x4
black flat-head screws with M3x4 white head screws.
6. Remove the HDD chassis.
7. Remove the HDD connector.
CAUTION: Do not apply pressure to the top or bottom of the drive.
EQUIUM M40/M45 / Satellite M40/M45 Maintenance Manual
Figure 4-11 Removing the HDD pack
Figure 4-12 Removing the HDD chassis
4 Replacement Procedures
4-21