System Information - Toshiba EQUIUM M40 Maintenance Manual

3 Diagnostic Programs
During the editing, user could press F2 to confirm the DMI attribute update or press F4
to ignore the modification. Press ESC to exit the program of DMI Write.
The confirmation screen is as below:
The attributes that have been modified would be marked in red; otherwise in yellow.
User could press F2 to save the changes, or press F4 to ignore and exit the current
program.

3.2.9 System Information

This function is used to read the system information. When the test is completed, a file
named System.log will be saved in the defined location. During the reading process, the
following screen will be displayed to indicate that the progress is in detection:
10 EQUIUM M40/M45/ Satellite M40/M45 Maintenance Manual
3.2 Quick Start