Light Profiles And Event Rules; View Area; Capture Modes - Axis Q9307-LV User Manual

Hide thumbs Also See for Q9307-LV:

Table of Contents

AXIS Q9307-LV Dome Camera

Learn more

Light profiles and event rules

NOTICE

TICE

Don't edit the preconfigured profiles and rules so the device can work as designed.

There are preconfigured profiles and rules you can activate in Light > Profiles and preconfigured rules in System > Events. These

configurations make it easier for you to implement the device's several use cases. If you need another configuration, create new

profiles and rules instead.

A view area is a cropped part of the full view. You can stream and store view areas instead of the full view to minimize bandwidth

and storage needs. If you enable PTZ for a view area, you can pan, tilt and zoom within it. By using view areas you can remove parts

of the full view, for example, the sky.

When you set up a view area, we recommend you to set the video stream resolution to the same size as or smaller than the view area

size. If you set the video stream resolution larger than the view area size it implies digitally scaled up video after sensor capture,

which requires more bandwidth without adding image information.

A capture mode is a preset configuration that defines how the camera captures images. The capture mode setting can affect the

camera's field of view and aspect ratio. The shutter speed can also be affected, which in turn affects the light sensitivity.

The lower resolution capture mode might be sampled from the original resolution, or it might be cropped out from the original, in

which case the field of view could also be affected.

Table of Contents