Table of Contents
Advertisement
7.2 Information for test institutes
To receive the necessary information for
conducting performance tests (e.g. according
to: EN60436 ), contact the manufacturer.
8. BASIC SETTINGS
You can configure the appliance by changing
basic settings according to your needs.
Num‐
Settings
ber
1
Water hardness
2
Rinse aid empty
notification
3
End sound
4
Auto door open
5
Key tones
6
Latest pro‐
gramme selection
1)
For more details, refer to the information provided in this chapter.
You can change the basic settings in setting
mode. Instructions on how to configure the
appliance are provided further in this chapter.
When the appliance is in setting mode, the
display shows a digit and a letter. For each
setting, a dedicated letter is displayed. The
dedicated letters are indicated in the table.
The order of the basic settings presented in
the table is also the order of the settings in
setting mode.
In your request, include the model from the
rating plate.
Values
Description 1)
1L - 10L
Adjust the level of the water softener according to
the water hardness in your area.
Factory setting: 5L.
1d (on)
Activate or deactivate the rinse aid indicator.
0d (off)
Factory setting: 1d.
1b (on)
Activate or deactivate the acoustic signal for the
0b (off)
end of a programme.
Factory setting: 0b.
1o (on)
Activate or deactivate the Dry Assist.
0o (off)
Factory setting: 1o.
1F (on)
Activate or deactivate the sound of the buttons
0F (off)
when pressed.
Factory setting: 1F.
1H (on)
Enable or disable the automatic selection of the
0H (off)
most recently used programme and options.
Factory setting: 0H.
8.1 Setting mode
How to navigate in setting mode
You can navigate in setting mode using
programme buttons.
A. Previous button
B. OK button
A
B
C
ENGLISH
11
Advertisement
Table of Contents
