Basic Settings - Smeg DI4522 User Manual

1) 2)
Programme
Self Clean
1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of
dishes and the degree of soil can change the values.
2) The values for programmes other than ECO are indicative only.
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), contact the
manufacturer.

BASIC SETTINGS

You can configure the appliance by
changing basic settings according to your
needs.
Num‐ Settings
ber
1 Water hard‐
ness
2 Rinse aid level
3 End sound
4 Auto door
open
5 Key tones
1) For more details, refer to the information provided in this chapter.
You can change the basic settings in
setting mode.
Water (l)
8.5 - 10.4
9.9
8.0 - 10.5
7.4 - 8.9
In your request, include the model from
the rating plate.
Values
Description
From level 1 to Adjust the level of the water softener ac‐
level 10 (de‐ cording to the water hardness in your area.
fault: 5)
From level 0 to Adjust the level of the rinse aid according to
level 8 (de‐ the necessary dosage.
fault: 5)
On Activate or deactivate the acoustic signal for
Off (default) the end of a programme.
On (default) Activate or deactivate the Dry Assist.
Off
On (default) Activate or deactivate the sound of the but‐
Off tons when pressed.
When the appliance is in setting mode, the
indicators on the control panel represent
available settings. For each setting, a
dedicated indicator flashes:
Energy (kWh)
0.743 - 0.909
0.704
0.683 - 1.047
0.396 - 0.484
1)
9
Duration (min)
90
240
120 - 170
60