Hatco Imperial Series Installation And Operating Manual page 18

INSTALLATION
One set of four legs supplied with all Imperial and mini-
Compact Booster Heaters. (all Compact 4-57 kW units
supplied with either a set of legs or mounting brackets.)
Plastic leg, Part No. 05.30.069.00
Stainless Steel, Part No. 05.30.070.00
Mounting Brackets with Hardware
a set of mounting brackets or a set of legs supplied with
each Compact 4-57 kW booster heater.
Part No. R04.20.030.00
Temperature/Pressure Gauge
Two temperature/pressure gauges supplied with all
booster heaters.
Part No. 03.01.003.00
Temperature/Pressure Relief valve
One temperature/pressure relief valve supplied with all
booster heaters.
mini-Compact Series, Part No. 03.02.020.00
Compact & Imperial Series, Part No. 03.02.022.00
Leg
Figure 6. Components Shipped with the Heater Unit
Pressure Reducing valve
One pressure reducing valve with built-in bypass supplied
with all boosters.
Pressure Reducing Valve, Iron, Part No. 03.02.004.00
Pressure Reducing Valve, Brass (optional),
Part No. 03.02.015.00
Shock Absorber
an optional shock absorber is available for all electric
boosters.
Part No. 03.40.057.00
Blended Phosphate Water Treatment System
an optional blended phosphate water treatment system is
available for all electric booster heaters.
Part No. 03.05.061.00
(Replacement Cartridge Only, Part No. 03.05.061a.00)
Back Pressure Relief valve
an optional back pressure relief valve is available for all
electric booster heaters.
Part No. 03.02.039.00
18
English
Form No. EBOOSTERm_CN-0911