Table of Contents
Advertisement
NI-DAQmx
NRSE
O
OEM
offset
P
PCI
PGIA
physical channel
PXI
R
RSE
© National Instruments Corporation
The latest NI-DAQ driver with new VIs, functions, and development tools
for controlling measurement devices. The advantages of NI-DAQmx over
earlier versions of NI-DAQ include the DAQ Assistant for configuring
channels and measurement tasks for your device for use in LabVIEW,
LabWindows/CVI, and Measurement Studio; increased performance such
as faster single-point analog I/O; and a simpler API for creating DAQ
applications using fewer functions and VIs than earlier versions of
NI-DAQ.
Non-Referenced Single-Ended mode—all measurements are made with
respect to a common (NRSE) measurement system reference, but the
voltage at this reference can vary with respect to the measurement system
ground.
Original Equipment Manufacturer.
The unwanted DC voltage due to amplifier offset voltages added to a
signal.
Peripheral Component Interconnect—a high-performance expansion bus
architecture originally developed by Intel to replace ISA and EISA. It
offers a theoretical maximum transfer rate of 132 Mbytes/s.
Programmable gain instrumentation amplifier.
See channel.
PCI eXtensions for Instrumentation—PXI is an open specification that
builds off the CompactPCI specification by adding
instrumentation-specific features.
Referenced single-ended mode—all measurements are made with respect
to a common reference measurement system or a ground. Also called a
grounded measurement system.
G-5
Glossary
E Series User Manual
Advertisement
Table of Contents
