Screw specifications
2
M2.0 x 4.0
Step 3.
Remove the SSD bracket.
Note: Only the 2242 SSD includes the bracket.
Figure 8. Remove the SSD bracket
Step 4.
Remove the SSD by pulling it away from the slot.
Figure 9. Remove the SSD
Refer to "Major FRUs and CRUs" on page 24 to look up details about the following replacement parts:
SSD
SSD bracket
Remove the Hard Disk Drive (HDD)
Make sure the following FRUs (or CRUs) have been removed.
"Remove the service door" on page 30
Note: Only selected models have included the HDD.
Step 1.
Detach the battery cable connector first
2 3
board
.
32
Hardware Maintenance Manual
Number of screws
3
1
. Then, detach the HDD cable connector from the system