Parking Brake Lever
1
2
Power Take-Off (PTO) Switch
Steering Levers
•
Reverse (1) – Pull both steering levers
backward.
•
Forward (2) – Push both steering
levers forward.
•
Left (3) – Pull left steering lever back
or push right steering lever forward or
a combination of both.
•
Right (4) – Pull right steering lever
back or push left steering lever
forward or a combination of both.
1
3
NOTE: To stop, return both steering levers to
neutral.
NOTE: The steering levers must be in the
neutral position to start the engine.
NOTE: The parking brake must be
disengaged prior to moving the steering
levers from the neutral position.
Engages (2) and
disengages (1) parking
brake.
Engages (2)
1
and
disengages
(1) mower
blades.
2
Height of Cut
(Figure 5)
1. Press the mower lift pedal to raise the
deck.
2. Position height of cut selector lever at
the desired setting in the height of cut
bracket.
3. Release mower lift pedal.
2
1. Mower Lift Pedal
2. Height of Cut Selector Lever
3. Height of Cut Bracket
Seat Adjustment
Models 915159, 161, 171
(Figure 6)
Push lever back and slide seat forward or
backward to the desired position. Release
lever to lock seat in position.
2
4
EN - 15
3
Figure 5
Figure 6
1