Table of Contents
Advertisement
Quick Links
Printed Matter No. 9836 7911 01
Publication Date 2019-11-22
Valid from Serial No. A6410001
Valid to Serial No. C1819999
ETD M 120 ABL V2 ( 30–120 cNm)
Hand held current controlled
Read all safety warnings and instructions
Failure to follow the safety warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference
ETD M120ABL V2
8432081582
WARNING
Product Instructions
Screwdriver
Advertisement
Table of Contents
Related Manuals for Atlas Copco ETD M120ABL V2
Summary of Contents for Atlas Copco ETD M120ABL V2
- Page 1 ETD M120ABL V2 Printed Matter No. 9836 7911 01 Screwdriver Publication Date 2019-11-22 Valid from Serial No. A6410001 Product Instructions Valid to Serial No. C1819999 ETD M 120 ABL V2 ( 30–120 cNm) 8432081582 Hand held current controlled WARNING Read all safety warnings and instructions Failure to follow the safety warnings and instructions may result in electric shock, fire and/or serious injury.
-
Page 2: Table Of Contents
Tighten joint .................. 10 Unscrew joint .................. 10 Service ........................ 11 Preventing ESD problems ................ 11 Maintenance instructions ................ 11 Service recommendations .............. 11 Preventive maintenance .............. 11 Instructions .................. 11 Recycling ....................... 12 Recycling instruction.................. 12 Recycling information .................. 12 © Atlas Copco Industrial Technique AB - 9836 7911 01... -
Page 3: Product Information
■ Damage to parts that occurs as a result of inadequate maintenance or performed by parties other than Atlas Copco or their Certified Service Partners during the warranty period is not covered by the warranty. ■ To avoid damage or destruction of tool parts, service the tool according to the recommended mainte- nance schedules and follow the correct instructions. -
Page 4: Website
You can find information concerning our products, accessories, spare parts and published matters on our website. Safety Data Sheets MSDS/SDS The safety data sheets describes chemical products sold by Atlas Copco. For more information, consult the website: www.atlascopco.com Choose Products - Safety Data Sheets, and follow the instructions on the page. -
Page 5: Service Overview
To perform the test, place the tool in the rig and securely fastened with the spanner. Connect the tool to the controller and run at no load. The rotation speed is set to 200±10 rpm. © Atlas Copco Industrial Technique AB - 9836 7911 01... - Page 6 The tool is connected to the controller and rotation speed is set to 200±10 rpm. The voltmeter is connected to the test bit cable and to the outside of the tool connector with the alligator clamp. © Atlas Copco Industrial Technique AB - 9836 7911 01...
-
Page 7: Preventive Maintenance
Valid at normal usage of the tool at a load up to 70% of maximum torque. Interval Action 1.500.000 cycles or 1 year Calibrate the tool 2.000.000 cycles Exchange front part 3.000.000 cycles Exchange motor © Atlas Copco Industrial Technique AB - 9836 7911 01... -
Page 8: Installation
The tool can also be fixtured using the threds at the front part, accessible under the thread protection ring. NOTICE Make sure the cable is not bent more than a radious of 55 mm (2.2 in). © Atlas Copco Industrial Technique AB - 9836 7911 01... -
Page 9: Operation
■ Use dust extraction system or mouth protection mask in dusty environments. Tool Mount bit Press the chuck ring inwards © Atlas Copco Industrial Technique AB - 9836 7911 01... -
Page 10: Tighten Joint
Starting the unscrew process depends on the installation and set-up of the tool, for example: ■ Press the reverse lever (B) briefly. ■ Press and hold the reverse lever (B) until the loosening is finished. ■ Start the tool using an external device. © Atlas Copco Industrial Technique AB - 9836 7911 01... -
Page 11: Service
■ Necessary special equipment as shown in the exploded views/tables. ■ For testing a calibration rig is recommended. ■ PC with internet connection to be able to download necessary keys. © Atlas Copco Industrial Technique AB - 9836 7911 01... -
Page 12: Recycling
Spring ring Metal, Steel Cover ring Metal, Aluminium Sleeve Metal, Steel Handle Metal, Aluminium Screw Metal, Steel Washer Metal, Steel PTS board Electronics Holder Plastic, Other, PA Housing Metal, Steel © Atlas Copco Industrial Technique AB - 9836 7911 01... - Page 13 Metal, Steel Start lever Metal, Aluminium Metal, Steel Spring Metal, Steel Circut board Electronics Temperature sensor Electronics Cover Plastic, Other, PA Plate Metal, Steel Screw Metal, Steel Connector Metal, Steel © Atlas Copco Industrial Technique AB - 9836 7911 01...
- Page 16 Original instructions Atlas Copco Industrial © Copyright 2019, Atlas Copco Industrial Technique AB. All rights reserved. Any Technique AB unauthorized use or copying of the contents or part thereof is prohibited. This SE-10523 STOCKHOLM applies in particular to trademarks, model denominations, part numbers and drawings.