ABB AKD-5 Installation Manual page 27

15. Remove the racking tool
16. Extend the racking tool to create a cranking device.
Figure 21. Racking Tool
Figure 22. Cassette Assembly Inside Switchgear Compartment (w/no breaker)
17. Insert a screwdriver in the slot or rack-out lock, and turn it clockwise 90° so that the racking handle shutter
opens and insert the racking tool. (It resembles a vehicle ignition lock. See
25 EntelliGuard R Circuit Breaker Retrofill AKD-5/6 Installation Manual
(Figure21) from the storage location on the cassette right front panel.
(Figure 23).
DEH0005240 R01