ABB AKD-5 Installation Manual page 25

Figure 16. Cabinet with Compartment
Door Closed
7. Check that the cassette is free from obstruction.
retrofill breaker and Kirk Lock Information Label supplied with AK-75 , AK-100 AKR-75 and AKR-100 Cassettes.
8. Verify that the cassette position indicator shows DISCONNECTED and the racking handle is disengaged.
9. Ensure that the cassette racking cams on both side walls of the cassette are in the completely
Racked-out position.
10. Pull out the two cassette LOADING RAILS to their full extent, horizontal to the ground
NOTE: Both loading rails should be fully extended and latched or they will not be able to support the breaker.
Figure 18. Racking Arms / Loading Rails, Extended
23 EntelliGuard R Circuit Breaker Retrofill AKD-5/6 Installation Manual
Figure 17. Cabinet with Compartment
Door Open
displays the racking assembly, supporting the new
Figure 17
(Figure 18).
DEH0005240 R01