Replacing The Motor Limit Switch And/Or The Auxiliary Switch - GE GL 310 F3/4031 P/VR Operating Instructions Manual

8.2.4

Replacing the Motor Limit Switch and/or the Auxiliary Switch

REV6
/REV2
• Disconnect the wire connections to the motor limit switch (7) and/
or the auxiliary switch (5).
6
3
1 Lever
2 Drive rod
3 Locking clamp
4 Connecting rod
5 Auxiliary switch
6 Drive rod
7 Motor limit switch
• Remove the locking clamps (3). Remove the drive rod
(2 or 6) and the connecting rod (4).
• Unscrew the M5 mounting screws.
• Remove the motor limit switch or auxiliary switch.
• Unscrew the M4 screw(s) and remove the lever (1).
• Mount the lever on the new motor limit switch or auxiliary switch.
OI 248 (EN)
T
ROUBLESHOOTING
1 2
5
7
1
3
4
-
-
-
-
-
-
-
61