Reconditioning The Fixed Contact; Lubricating The Interrupter Unit - GE GL 310 F3/4031 P/VR Operating Instructions Manual

10.1.6

Reconditioning the Fixed Contact

10.1.7

Lubricating the Interrupter Unit

REV6
/REV6
• Replace the guide strip (12). The guide strip is located in a
dovetail groove. It is therefore necessary to overcome
mechanical resistance when replacing it.
12
12 Guide strip, 3x5x380 (GK)
• Unpack and grease a new interrupter unit (5).
- Lubricate the outer diameter of the interrupter unit in the area of
the electrical sliding contact surface per lubrication specification
L6.
- Grease the entire length of the interrupter tube in the interrupter
unit per lubrication specification L7.
L7
5 Interrupter unit
OI 248 (EN)
R
ECONDITIONING
5
L6 L6
1x
1x
79