Table of Contents
Advertisement
8.2 Operation
■ Switching the interface on and off
When the LED in the DISK switch is off, the SOLO,
UPPER, LOWER, and PEDAL switches (UPPER, LOWER,
and PEDAL) serve to connect and disconnect the key¬
boards from their assigned channels.
Note:
Some notes may be lost if the organ and the other
instrument have a different number of keys on their
keyboards.
• WARNING
Turning off the power or disconnecting the interface
cable while a key is pressed and the interface is
operative may cause the receiving instruments to
sound continuously. Cut the power to silence the
instrument.
In certain situations (described below), deactivating the
MIDI interface while a key is pressed may also produce
the same undesired effect. This only happens when (a)
the receiving instrument is in the OMNI ON mode and
(b) the two instruments have been assigned different
channels. The best way to prevent this is to ignore the
OMNI ON mode and assign both instruments to the
same channel. If it does occur, however, either turn off
the receiving instrument or turn the MIDI interface
back on and play something on the keyboard.
67
Advertisement
Table of Contents
