Table of Contents
Advertisement
7.4 Saving and Loading Program Registration
This is a function whereby the contents stored in the memory of program registrations 1 to 7 (1 to 5 for the SR50) and the
bank button, and the panel settings at the time of saving, that is, a total of 15 registration items (11 for the SR50), are saved
to a floppy disk.
Saving to a disk takes place in index number units. Loading takes place either in index number units or freely item by item.
99 groups of index numbers can be saved per floppy disk.
Note:
Index Numbers
When storing program registrations on one floppy disk, each data item is assigned a number (index number) that controls
it.
Registration Disk
Index Number 1
Index Number 2
-Registration 1, Bank A
— Registration 1, Bank B
— Registration 2, Bank A
•
— Registration 5, Bank A
SR70only
•
— Registration 5, Bank B
•
— Registration 6, Bank A
•
— Registration 6, Bank B
_
•
— Registration 7, Bank A
•
- Registration 7, Bank B
— Panel Registration
— Index Number 99
■ Saving to a Floppy Disk
Note:
Turn the disk write protect off (close the window) during
saving.
(1)
Insert a registration disk.
(2)
Press the DISK button.
The DISK button lamp lights and the multifunction
display indicates the following. Index number 1 is
selected at this time.
Note:
If "SEQ" or "RHY" is displayed on the multifunction
display, the inserted disk is not a registration disk. Either
insert a registration disk, or reformat the inserted disk as
a registration disk. (Refer to page 63 for the formatting
procedure.)
53
Advertisement
Table of Contents
