Table of Contents
Advertisement
• Procedure
(1) Press the appropriate switch in the KEYBOARD
CONDUCTOR section.
UPPER
To change from ORCHESTRA I to PRESET
INSTRUMENT, for example, simply press the
PRESET INSTRUMENT switch. The organ then
automatically changes to the registration (tone,
volume, and effects) specified in the PRESET
INSTRUMENT (UPPER/SOLO) control block at
the top of the keyboard.
Notes:
• The synthesizer control blocks can be only used
for one keyboard at a time. On the SR70 SYNTHE¬
SIZER H offers a choice of SOLO or PEDAL; SYN¬
THESIZER L, SOLO, UPPER, or PEDAL. On the
SR50, there is only one synthesizer and a choice
between the UPPER or LOWER keyboards.
•The SR Series stores registration and other set¬
tings in non-volatile memory. This has its own
battery power supply that keeps them from disap¬
pearing when you turn off the organ. The same
RHYTHM, KEYBOARD CONDUCTOR, individual
tone, and other settings are therefore always avail¬
able when you next turn on the organ. However,
the organ tuning automatically returns to 0 (see
page 70), and the clock to internal.
It is also possible to mix two registrations by
holding down the switch for the current one and
pressing a second switch. The only exceptions are
the SYNTHESIZER registrations. (See Note below.)
10
Advertisement
Table of Contents
