A) Midi- Operation A Ae Aai - Kawai MR170 Owner's Manual

4) MIDI Operation
A. Setting the channel
In order to be able to exchange information with a connected MIDI
instrument, you must first set the interconnected instruments to the
same channel.
+ Procedure
(1) Make sure that the digital piano is in the programming mode.
(See p. 5.)
(2) Press the PIANO2 switch so that it flashes to indicate that the
interface is waiting for a channel specification. (It is also possible to
turn the MULTI TIMBRE function on and off. See following section.)
ni,
~ A e
PIANO2
(3) Select the channel by pressing the one of the first 16 white keys at
the lower end of the keyboard.
— Channel No. ~
«Note: You have 16 channels to choose from.
(4) Pressing one of these keys automatically sets the instrument's
transmitting and receiving channel to the number selected.
(5) Leave the programming mode. (See p. 5.)
«Note: When the power is first applied, the interface uses Channel 1 and
has the OMNI parameter on. Changing to another channel
automatically turns the OMNI parameter off. In OMNI mode,
information from all channels is received.
13