Operation - Kawai SR2 Owner's Manual

в --
И Example: Connecting Ше Organ to
a Synthesizer
e Procedure
(1) Using a MIDI cable, connect the MIDI OUT
terminal on the organ to the MIDI IN termi-
nal on the synthesizer so that the organ can
control the synthesizer. (This example has
the organist playing the synthesizer from the
upper keyboard on the organ.)
(2) Set up the synthesizer to receive on channel
1. (Refer to the synthesizer's Instruction
Manual for the procedure.)
All notes played on the upper keyboard will
sound on the synthesizer.
Channel 1
Synthesizer
SR Series Organ
7.2 Operation
е WARNING
Turning off the power or disconnecting the inter-
face cable while a key is pressed and the interface
is operative may cause the receiving instruments
to sound continuously. Cut the power to silence
the instrument.
Ш Setting Program
19
The following table indicates the corresponding
relations between the registration memory and
program number.
Registration Switch
Program No.
1
E Synchronized performance with the
instruments connected to the system
sequencer