Advertisement
4) MIDI Operation
A. Setting the channel
¢ Procedure
(1)Make sure that the digital piano is in the programming mode.
(See p. 6.)
(2)Press the PIANO2 switch so that it flashes to indicate that the
interface is waiting for a channel specification. (It is also possible to
turn the MULTI TIMBRE function on and off. See following section.)
PIANO2
«Note:
You have 16 channels to choose from.
(4) Pressing one of these keys automatically sets the instrument's
transmitting and receiving channel to the number selected.
(5) Leave the programming mode. (See p. 6.)
automatically turns the OMNI parameter off. In OMNI mode,
information from all channels is received.
13
Advertisement
