Fagor IO-WMS-1565 Instruction Manual page 76

DISPLAY AND CONTROL PANEL
Easy Iron
7
Once the programme has ended, the Anti-crease function operates for 30 minutes
(default) or 120 minutes (when selected).
This feature prevents creases in clothing. The laundry can be removed during the
Easy Iron phase. You can select this function in all programmes except [Time Cold air],
[Time Warm Air] and [Refresh].
Steam Touch
8
This system will help significantly reduce creases of dried laundry. The appliance
generates steam that reduces up to 70% of creases.
Touch
The system can only be activated for the programmes that are marked in blue on the
control panel.
NOTE! Fill the Steam Touch system with water before first use. It is recommended that you use
distilled water.
Fill the steam system container with water
When water level in Steam Touch system is low the
indicator will turn off.
To add water to the Steam Touch system you will need to remove the condensate
container first.
Then add water using a special bottle. Full bottle will allow you to up the system.
NOTE! More water may be needed when you fill the system for the first time.
Pour the water from the bottle through the filling opening (photo below).
There is a filter in the filling opening which can be easily removed. Clean it regularly.
The filter prevents larger particles and impurities which my be present in the water from
entering the system.
Add water and the
76
on the control panel to activate the system.
indicator will turn off. You must reinstall the condensate tank.
indicator will blink. Add water and the