Fagor IO-WMS-1565 Instruction Manual page 75

Time Remaining
3
Use this function to delay drying for up to 24 hours. Time remaining indicates that the
drying programme will end after a specified number of hours.
A detailed procedure:
Load the drum and make sure that the appliance door is closed.
Press
Select Beep as needed.
Press the Time Remaining button.
Press [Time Remaining] repeatedly until a suitable time delay is reached.
Press
The drying programme is completed when Time Remaining elapses.
Press
Press
Always set the Time Remaining function the last! An extra feature of the main programme.
The Time Remaining function will be cancelled if you change any drying programme set-
tings.
Drying time
4
When you select the Warm air, Cold air or Refresh, you can use the [Drying Time] to
adjust the drying time in steps of 10 minutes.
Drying level
5
Use this function to adjust clothes drying intensity.
You can only activate Drying Level function before the programme starts.
Press the [Drying Level] to select the drying time.
The Drying Level function can be used only in [Cotton] [Mix] [Jeans] [Synthetics] and
[Outdoor] programmes.
The appliance offers 3 drying levels: Cupboard Dry
(laundry will be still damp)
Beep
6
Disables or enables the beep. By default the beep is on. Press if necessary.
If the beep is on:
The dryer will beep when you press an additional programme feature button.
When you rotate the programme selector knob during operation, you will hear a beep
to alert you to invalid selection.
The appliance will beep when the drying programme has ended.
and then rotate the program selector knob to the desired programme.
to start a drying programme.
again to pause the Time Remaining function.
to cancel the Time Remaining function.
, Hanger Dry , and Iron Dry
75