Ethernet - Honeywell PC45 Series User Manual

Ethernet

To view these settings:
•
•
Ethernet Setting
(IPv4) IP Assignment
Method
(IPv4) IP Address
Subnet Mask
Default Router
DHCP Response
(IPv6) IP Assignment
Method
(IPv6) IP Address
802.1xSecurity
EAP Type
Username
Password
CA Certificate
Client Certificate
Private Key
82
From the printer Main Menu, select Settings > Communications > Ethernet.
From the printer web page, click Configure > Communications > Ethernet.
Description
Specifies how the printer obtains an IP address.
Specifies the unique network-level address that is
assigned to each device in a TCP/IP network (IPv4).
Specifies a number that defines the range of IP addresses
that can be used in a TCP/IP network.
Specifies the IP address of a router that is used when a
device sends a packet to another subnet or to an
unknown destination.
Specifies if the printer receives DHCP responses by
broadcast or unicast.
Specifies how the printer obtains an IP address (for IPv6
networks).
Specifies the unique network-level address that is
assigned to each device in a TCP/IP network (IPv6).
Enables 802.1x security
Selects the protocol that the radio uses to verify its
identity and makes sure that it is authorized to
communicate on the wireless network.
Specify Username for 802.1x Authentication
Password for PEAP authentication or private-key
password for TLS
Sets the name of the Certificate Authority (CA) that
verifies the server certificate. This CA should be the same
one that was used to sign the server certificate.
Sets the name of the client certificate the printer uses to
authenticate to the network using EAP-TLS. Maximum
length is 128 characters.
Sets the full path to the private key file the printer uses for
EAP-TLS. Maximum length is 128 characters. If using pfx
file here, the Client Certificate should not be specified.
PC45 Series Printer User Guide
Default
DHCP
0.0.0.0
0.0.0.0
0.0.0.0
Broadcast
Automatic
Automatic
Disable
PEAP
-
-
-
-
-