Configure Bluetooth Communication From The Main Menu; Configure Wi-Fi Communication; Configure Wi-Fi Communications From The Web Page - Honeywell PC45 Series User Manual

Configure Bluetooth Communication from the Main Menu

Use the procedure to configure Bluetooth settings from the printer Main Menu.
You may need to configure these settings if you want to connect to a mobile com-
puter through Bluetooth.
1.
2.
3.
4.

Configure Wi-Fi Communication

The printer supports wireless communications when the optional Wi-Fi module is
installed.
You can configure wireless communications:
•
•
By default, the printer supports DHCP networks.
Note: If you are not using a DHCP network, Wi-Fi settings must be configured by using
Honeywell PrintSet 5 through a USB connection to the printer. Send commands
through a serial connection, or use the wizards and settings menus on the printer.

Configure Wi-Fi Communications from the Web Page

Use this procedure to configure wireless communications from the printer web
page.
Note: The printer must be turned on and connected to your Wi-Fi or Ethernet network to
configure the printer from the web page.
1.
2.
3.
4.
5.
6.
7.
38
Press the Main Menu button.
Select Settings > Communications > Bluetooth.
Change settings as needed for your Bluetooth device.
Tap Save.
From the printer web page.
From the printer Main Menu.
Open a web browser on your PC.
In the address bar, type https:// followed by the printer IP address and press
Enter. The printer web page appears.
Click Login.
Type your Username and Password and then click Login. The default value for
Username is itadmin and the default value for Password is pass.
Click Configure. The Configuration Summary page appears.
Click Communications > Wireless 802.11. The Wireless 802.11 settings page
appears.
Change wireless settings as needed. You can also click Default Settings to
restore all default Wireless 802.11 settings.
PC45 Series Printer User Guide