Input Settings - ViewSonic VS19315 User Manual

Input Settings

To select an Input Source:
1. Press INPUT on the remote control, press the setting button
panel, or press the
menu.
2. Press
q/p/t/u
NOTE: PC source will only display when the slot-in computer is connected.
3. Press ENTER on the remote control, or touch the input source.
4. Press EPG/BACK on the remote control, or touch a blank area outside of the
menu to exit.
NOTE: To adjust the settings of an input source,
the highlighted input source.
setting icon from the toolbar to display the Input Settings
to select the input source you want.
touch the setting icon next to
47
on the front