Input Settings
To select an Input Source:
1.
Press INPUT on the remote control, press the setting button
panel, or press the
Settings menu.
2.
Press
q/p/t/u
NOTE:
PC source will only display when the slot-in computer is connected.
3.
Press ENTER on the remote control, or touch the input source.
4.
Press BACK on the remote control, or touch a blank area outside of the menu to
exit.
NOTE: To adjust the settings of an input source,
the highlighted input source.
setting icon from the toolbar to display the Input
to select the input source you want.
touch the setting icon next to
40 40
on the front