V-ZUG Cooler V200 Installation Instructions Manual page 63

Fig. 52
u Push the fitting aids to the height of the custom door
panel. The bottom of the fitting aid must be level with the
top of the custom door panel to be mounted.
Fig. 53
u Loosen the counter nut and remove the crosspiece.
Fig. 54
u Hang the crosspiece on the inside of the custom door
panel and make sure it is central.
Fig. 55
u Fix the crosspiece using at least 6 screws for panel doors
and at least 4 screws for panel doors.
* Depending on model and options
Installing the appliance in the recess
Fig. 56
u Pull out the fitting aids, turn them round and put them in
the adjacent opening.
Fig. 57
u Clip the cover on the crosspiece on the handle side.
Fig. 58
u Attach the custom panel and loosely screw the lock nuts
onto the adjusting bolts.
Fig. 59
u Align the custom panel in the X and Y direction using the
adjusting bolts.
63