Table of Contents
Advertisement
OPERATION
ThrottleControl
Lever
Blade Rotation
Control
Brake Pedal
Speed
Control
P_ial
Figure 7
LOCATION
OF CONTROLS
BLADE ROTATION
CONTROL:
Use the blade rotation
control to start and stop the rotation of the blade.
BRAKE PEDAL:
Use the brake pedal to quickly stop.
HEADLIGHT
SWITCH:
The headlight switch is the first part
of the ignition switch. To use the lights with the engine running, turn
the key to the position for the lights.
IGNITION
SWITCH:
usetheignition s witch tostart a ndstop
the engine,
BATTERY
LIGHT:
Indicates
whether
battery
is being
re-
charged when engine is running.
When the engine
is running and
the light is on this means the battery IS charging.
If indicator is not
on, have a battery and/or engine charging
system checked
by an
authorized
service dealer.
710933
OK LIGHT:
Ifthisindicatorlightis on,theengine willnotstart.
1. Your clutch-brake pedal may not be fully depressed.
2. The blade rotation control may not be in the DISENGAGE posi-
tion.
AUTOMATIC
DRIVE DISCONNECT:
Usetheauto-
matic drive di,_connect,located under the seat, to disengage the
transmission.
LIFT LEVER:
Use the lift lever to change the height of cut.
PARKING
BRAKE LEVER: use theparking
brake lever
to engage the brake when you leave the unit.
SPEED CONTROL
PEDAL: Use
the
speed control pedal
to change the speed and the direction of the unit.
THROTTLE
CO NTROL LEVER: use
the throttle control
lever to increase or decrease the speed of the engine,
13
Advertisement
Table of Contents
