Table of Contents
Advertisement
MAINTENANCE
HOW TO INSTALL THE MOWER HOUSING
HOW TO REMOVE
THE MOWER
HOUSING
1.
Move the blade rotation €ontrol to the DISENGAGE position.
2.
Move the tilt lever to the level adjustment position (Figure 26).
WARNING:
The lift lever
d_lb
le spring
loaded.
Make
sure the lilt lover II locked
In the
LEVEL ADJUST-
MENT position.
3.
Remove the hair pins and the
washers
from the adjuster
ernw
(Figure 27). See illustra-
tions "C"and "D'.
4.
Remove the hair pins and wssh-
ars from the euapermlon
links.
See illustrations =A"and =B'.
5.
Disconnect the extension spring from the blade control rod.
See illustration "E'.
6.
Disconnect the front hanger from the axle support. See
illustration "F'.
7.
Remove the mower drive belt from the stack pulley.
8.
Pull the mower housing away from the right side of the unit.
9.
To operate Without the mower housing, move the liftlever to the
TOP position.
Lift Lever
\
Lifter
Assemb_
A_rUSter
Sus_..n_Si°n
B
710933
1.
Push the mower housing under the right side of the unit.
2.
Put the mower drive belt around the stack pulley. Make sure
the'V" side ofthe mower drive belt is against the stack pulley.
Also. make sure the mower drive belt is not twisted.
3.
Attach the front hanger to the axle support with the hanger
rod. Fasten with the fasteners as shown. See illustration"F".
4.
Make sure the mower drive belt is between the stack pulley
and the two belt guides. See illustration "G'.
5.
Attach the suspension
links to the lifter aSSembly. Fasten
with the washers and hair pins. _P, ee illustrations"A"and "B'.
6.
Attach the right and the left adjuster arms to the suspension
brackets. Fasten with the washers and hair pins. See illustra-
tions "C"and "D'.
7.
Attach the extension spring to the blade control rod. See
illustration"E'.
8.
Move the blade rotation control to the ENGAGE position,
Make sure the mower drive belt is inside all the belt gulde,s.
9.
Make sure the mower housing is level. See the instructionson
*How To Level The Mower Housing'.
10. ChecktheoperationofthebladerotatloncontroI.
Seethein-
structions on "How To Adjust The Blade Rotation Control'.
Blade Rotation
Control
Mower Drive Belt
26
Hanger Rod
G
MowerDriveBelt
A uster
Extension
Spring
Blade
F
Figure27
Advertisement
Table of Contents
