Table of Contents
Advertisement
MAINTENANCE
HOWTO REPLACE THE MOTIONDRIVE BELT
REMOVAL
1.
Remove the mower housing. See the instructions on "How To
Remove The Mower Housing'.
2.
Completely push the pedal forward and engage the parking
brake.
3.
Remove the Idler pulley (Figure 34).
4.
Remove the belt guide at the middle Idler pulley.
5.
Remove the motion drive belt from the drive pulley.
6.
Disengage the parking brake.
7.
Remove the motion drive belt from the V-Idler pulley.
8.
To remove the motion drive belt from the stack pulley, pullthe
front end of the belt under the stack pulley and then back
between the stack pultey and the steering plate (Figure 35).
9.
Remove the motion drive belt. A correct replacernent part or
assistance is available from an Authorized Service Center in
your area.
INSTALLATION
1.
Slide the motion drive belt between the stack pulley and the
belt guides (Figure 35). Install the motion drive belt on the
top pulley of the stack pulley. Make sure the 'V" side of the belt
is against the pulley.
2.
Push the motion drive belt through the opening between the
steering plate and the engine plate. Make sure the motion
drive belt is on the left side of the steering shaft assembly.
Install the end of the motion drive belt around the drive pulley
(Figure 34).
Install the motion drive belt on the V-Idler
pulley.
Completely push the pedal forward and engage the parking
brake.
3.
4.
5.
6.
Put the belt around the Idler pulley, Assemble the Idler pulley.
Fasten the Idler pulley with the hex nut. Make sure the flat side
of the belt is against the Idler pulley. Also, make sure the belt
is not twisted.
7.
Disengage the parking brake.
8.
Install the belt guide at the middle Idler pulley. Make sure the
back of the motion drive belt is against middle Idler pulley.
9.
Check the routing of the motion drive belt (Figure 36). Make
sure the motion drive belt is installed correctly on the Idler
pulleys.
10. Before you use the unit,check the adjustment ofthe clutch. See
the instructions"How To Check And Adjust The Clutch'.
11. Install the mower housing. See the instructions"How To Install
The Mower Housing'.
V-idler
MiddleIdler
Pulley
PuUey
\
Drive
Pulley
Motion
Drive Belt
Belt Guide
idler Pulley
Figure 34
Steering
Plate
Belt Guides
Figure
35
Idler Pulleys
Stack Pulley
Drive Pulley
Belt Guide
MotionDriveBelt
710933
29
Advertisement
Table of Contents
