Table of Contents
Advertisement
MAINTENANCE
WHERE TO LUBRICATE
/_p
Models with grease fittings: Lubricate with grease gun.
/J_,_
Apply grease with a brush to the areas shown.
,_
Lubricate the areas shown with engine oil.
NOTE: Apply grease to the steering gear assembly.
CAUTION: If the unit is operated in dry areas that have sand,
use a dry graphite spray to lubricate the unit.
Figure 24
HOW TO CHECK THE FUEL FILTER
NOTE: Before you replace the fuel filter or the fuel line, the fuel
tank must be empty.
If the fuel filter is dirty, the engine will run rough and have less
performance.
Remove the old filter (Figure 25). Replace the old
filter with a new filter. Use an original equipment
part. See an
authorized service dealer in your area.
Fuel Line
Fuel Filter
Figure 25
CHECK THE TIRES
Check
the air pressure
in the tires. 33res with too much air pressure
will cause
the unit to ride rough.
Also, the wrong
air pressure
will
keep the mower housing
from cutting
level. The correct
air pressure
is 14 PSI (1 BAR).
710933
25
Advertisement
Table of Contents
