Table of Contents
Advertisement
OPERATION
Throttle Control
Lever
Blade Rotation
Control
Brake Pedal
Speed
Control
Pedal
Lever
Figure 2
LOCATION
OF CONTROLS
BLADE ROTATION
CONTROL:
usethebladerotation
control to start and stop the rotation of the blade.
BRAKE PEDAL:
use the brake pedal to quickly stop.
HLAD LIGHT SWITCH:
The headlight switch is the first
part
of the ignition switch. To use the lightswith the engine running, turn
the key to the position for the lights.
IGNITION SWITCH:
Usetheignition switchtostartandstop
the engine.
BATTERY
LIGHT:
Indicates whether battery is being re-
charged when engine is running. When the engine is running and
the light is on this means the battery IS charging. If indicator is not
on, have a battery and/or engine charging system checked by an
authorized service dealer.
712008
11
OK LIGHT:
If this indicator light is on, the engine will not start.
1. Your clutch-brake pedal may not be fully depressed.
2. The blade rotation control may not be in the DISENGAGE posi-
tion.
AUTOMATIC
DRIVE DISCONNECT:
usetheauto-
matic
drive disconnect, located under the seat, to disengage the
transmission.
LIFT LEVER:
use the lift lever to change the height of cut.
PARKING
BRAKE LEVER: use
the
parking I?rake
lever
to engage the brake when you leave the unit.
SPEED CONTROL
PEDAL: usethespeed control pedal
to change the speed and the direction of the unit.
TH ROTTLE CONTROL
LEVER: usethethrottle c ontrol
lever to increase or decrease the speed of the engine.
Hide quick links:
Advertisement
Table of Contents
