Opentrons FLEX Quick Start Manual

Gripper
The Opentrons Flex Gripper is an instrument that can pick
up labware and move it around the deck automatically.
Adding a gripper to the Flex helps improve automated
workflows in your lab. This guide provides a high-level
overview of gripper features, including basic installation,
maintenance, and warranty information.
Labware Compatibility
The gripper is compatible with labware of the following
types:
Certain full-skirted 96-well plates, including
ƒ
Opentrons Tough PCR plates
Certain deep well plates
ƒ
All Opentrons Flex tip racks
ƒ
Check the Opentrons Labware Library for the latest
compatibility information: https://labware.opentrons.com.
The Flex Gripper may work with other ANSI/SLAS
compliant labware, but this is not recommended.
Box Contents
(1) Gripper with
Calibration Pin
(2) Spare
Gripper Paddles