Figure 5.6: Control Panel
PCMCIA Network Connections
If you have a network PCMCIA card, you will first need to have your
WinBook XL2 recognize the card and load the necessary drivers (see
above). Once your network card has been recognized and Windows 98 has
installed the necessary networking files, you will be asked to restart your
system to allow the new networking environment to function.
Windows 98 will configure your files and then ask you restart your system
so that the new files can take effect. Reboot your system. If you have added
network functions for the first time in this process, you will be
Chapter 5: PC Cards (PCMCIA)
Windows 98 will install
standard networking
protocols for cards it has
recognized. Contact your net-
work administrator to determine
if you will need to configure your
system for other protocols. If you
will be using your network out-
side Windows 98 (e.g. in DOS),
you will need to check with the
manufacturer of your network
card or with your network
administrator to determine how
to set up the proper drivers for
this environment.
5.7