Tv Out/S-Video Out - Winbook XL3 User Manual

09 XL3 Manual v.1 9/13/99 8:24 AM

TV Out/S-Video Out

PROBLEM: Video does not appear on the TV receiver.
ACTIONS:
• Make sure that the TV-out or S-video connection is secure.
• Make sure that the TV is set up to receive output from the port (for
example the Auxiliary In or S-video port) to which you have connected
the WinBook XL3. Check your TV documentation for assistance.
• Make sure that the TV out function is enabled. Your television must
be connected to the WinBook XL3 to allow for the signal to be directed
out. Right-click the ATI icon on the taskbar and select "Settings" and
"Display Settings." This will bring up the Display Properties dialog
box. Click on the "Settings" tab and then the "Advanced" button.
This will bring up the Display settings for your system. Click on the
"Displays" tab. If the radio button beside the Television option is not
selected, click on it to select it. Close the dialog boxes. Output should
now appear on the television (and LCD if you left it on, too).
PROBLEM: Entire desktop does not appear on the TV receiver.
ACTIONS:
• Check to be certain that you have selected the correct format (NTSC
or PAL) for your local TV standard. See Chapter Eight for information.
PROBLEM: Sound is not being transmitted to the TV receiver.
ACTIONS:
• The TV-out port only directs video output to the receiver. To transmit
sound, a cable must also be connected to the audio-out jack on the right
side of your WinBook XL3 and to the audio in jacks of the TV receiver.
Page 9.25
Chapter 9: Troubleshooting
9.25