Sony Trinitron WEGA KV-32HS510 Operating Instructions Manual page 44

Programming the Remote Control
Tire remote control is preset to operate Sony brand video equipment.
Beta, ED Beta VCRs AV1 303
8 mm VCR AV2 302
VHS VCR AV3 301
DVD player DVD 751
If you have video equipment other than Sony brand that you want to
control with the TV's remote control, use the following procedure to
program the remote control.
_._ If morethan one code
number is listed, try
entering them one by one 2
until you cometo the 3
correct codefor your 4
equipment.
_._ If you enter a new code 5
number,the codenumber
you previously entered at
that setting is erased.
_ In somecases,you maynot
be able to operate your
equipment with the
supplied remote control. In
such cases,use the
equipment's own remote
control unit.
Q
Wheneveryou removethe
batteries to replacethem,
the code numbersmay
revertto the factory setting
and must be reset.
Turn to the list of "Manufacturer's Codes" on page 44, and find
the three-digit code number for the manufacturer of your
equipment. (If more than one code number is listed, use the
number listed first.)
Set the A/V slide switch to, 2, 3, or DVD.
Press C0D %
Enter the three-digit manufacturer's code numben
Press N K
To check if the code number works, aim the TV's remote control
at the equipment and press the POWE button that corresponds
with that equipment. If it responds, you are done. If not, try using
another code listed for that manufacturer.