Sony Trinitron WEGA KV-32HS510 Operating Instructions Manual page 28

View (monitor) what is being
Press V/VD£ 0 repeatedly
to select the VCR input (VIDEO 1 in the
recorded illustration above).
Set up the TV remote control If you have a non-Sony VCR, you must program the remote control. See
to operate the VCR(s) "Programming the Remote Control" on pages 4,3-44.
Activate the TV remote Set the A/V slide switch to the position you programmed for the VCR. Then
control to operate the VCR(s) press VCR/DVDI-U_q¢ON.
Control VCR functioP, s with See "Operating a VCR" on page 60.
the TV remote control
Label video inputs to easily See the iP, s tructions for setting up Video Labels on pages 74-75.
identify equipment connected
to the TV