Cable Box Only - Sony Trinitron WEGA KV-32HS510 Operating Instructions Manual

Cable Box Only
IFo_ bestires_ks v ase _ his connecd_ if:
_I Your cable company scrambles all channels, which requires you
to use a cable box.
_I You do not have a VCR. (If you have a VCR, see pages 22 and 24.)
_1 Use the TV remote control to change channels coming through
the cable box to the TV's VHF/UHF jack. (You must first
program the remote control for your specific cable box.)
With this connection,all channelscomeinto the TVthrough your cablebox and only one
unscrambledsignal is sent to the TV,so you cannot usethe Twin View feature. If someof
your channelsare scrambled,but others are not, considerusingthe "Cable Box and
Cable" connectionon page 18 instead. For details about Twin View, seepage 46.
_o ccmned the cane box
1 Connect the CATV cable to the cable box's input jack.
Use a coaxial cable to connect the cable box's output jack to the
TV's VHF/UHF jack.
3 Run the Auto Setup program, as described in "Setting Up the
Channel List" on page 38.
CAW Cea×ancane
cable
VHF/UHF
Notes on Using This Connedion
Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3 or 4)
and then use the cable box to switch channels.
Set up the TV remote control Program the remote control. See "Programming the Remote Control" on
to operate the cable box pages 43-44.
Press ShiI/CAt1
IJl_4 CIION.
Activate the remote control to
operate the cable box
Prevent the accidental
switching of TV channels
When using the cable box, you need the TV to stay on the channel the cable
box is set to (usually channel 3 or 4). You can use the TV's Channel Fix
feature to lock in a specific charmel. For details, see "Using the Channel
Menu" on page 68.