Advertisement
7. Place an empty cup under the brew head. Turn the milk knob point at the cup.
Press and hold the Latte button for 3 seconds. The machine will start to make
hot water from the milk tube. Let the hot water flow out of the milk tube for about
8 seconds, then press the Latte button again to stop. This process allows the
water to flow into the empty pump for the first use.
Note:
8. Dispose of the water in the cup and place it back in the unit, and press the
Espresso button once to brew.
9. After the brewing cycle has finished, pour the water out.
Now your espresso coffee machine is ready to use.
PREPARING THE ESPRESSO
Using a cold filter holder, cold filter or cold cup(s) can reduce the extraction
temperature enough that it significantly affects the quality of your espresso. We
recommend to run a brewing cycle without coffee grounds to preheat them before
brewing (see steps 5-8 of Initial Use).
HOW TO USE
There will be a loud noise and little shake when the machine
running first time. It's normal for a 20bar pump. The noise will
be weak in the future using.
hold for
3 sec.
8
Advertisement
