Advertisement
CLEANING AND MAINTENANCE
If completely cleaning milk reservoir, follow the deep cleaning cycle instructions:
1. Place a large empty cup under the milk dispensing tube and make sure there is
water in the water tank.
2. Remove milk reservoir from machine and discard any remaining milk. Fill the milk
reservoir with clean water.
3. Aim the milk dispensing tube into the empty cup.
4. Press and hold the Latte button for 3 seconds. The machine will start to make hot
water from the milk dispensing tube. The clean cycle will run for 35 seconds and
then stop automatically. Or press the Latte button again to stop process manually.
5. Press and hold the Cappuccino button for 3 seconds. The machine will start to
make steam from the milk dispensing tube. This process will run for 2 minutes and
then stop automatically. Or press the Cappuccino button again to stop process
manually.
6. You can repeat steps 1-5 to make sure the residue milk is cleaned completely.
7. Rinse and wash all parts of the milk reservoir container and lid thoroughly with
warm soapy water. Rinse and dry well.
Note:
Do not use abrasive cleaners and scouring pads, as they will
scratch the finish. The milk reservoir and lid is also dishwasher safe.
21
Advertisement
