Advertisement
CLEANING AND MAINTENANCE
CLEANING THE FILTER HOLDER/PORTAFILTER
AND THE FILTERS
The filter holder and filters should be kept clean to guarantee perfect results.
Warning:
1. Remove the filter holder and discard the coffee grounds or used pod. Remove
the filter from the filter holder and wash them with warm water. Make sure to
rinse and dry them well.
2. If you notice a malfunction when brewing coffee, immerse the filter in boiling
water for 10 minutes and then rinse with running water.
Note:
CLEANING THE BREW HEAD
Regularly remove any residual coffee grounds from the brew head using a brush,
and wash with hot water following the steps below.
1. Wipe the lower part of the brew head in the unit with a damp cloth or paper towel
to remove any coffee grounds that might have been left.
2. Insert the empty filter holder into the brew head without using coffee grounds.
3. Place an empty cup under the brew head.
4. Press the double button and fill the cup with water.
5. Remove the filter holder from the brew head and clean the brew head with a dry cloth.
Warning:
CLEANING THE WATER TANK
1. Discard the remaining water by removing the water tank and turning it upside
down over the sink. It is recommended to empty the water tank between uses.
2. Wash the water tank with soapy water, Make sure to rinse and dry it well.
Note:
To avoid burns, the filter must only be removed when the
filter holder has cooled down completely.
Do not clean the filter holder and filters in the dishwasher.
Do not try to disassemble the brew head. It will damage
the brew head and lead to leakage.
Do not wash the water tank in the dishwasher.
22
Advertisement
