Yamaha GRIZZLY 550 2013 Owner's Manual page 135

1. Locknut
2. Brake pedal free play adjusting nut
4. Tighten the locknut.
5. After adjusting, there should be slight play at
the brake pedal cable joint as shown. If there
is no play, repeat steps 2 to 4.
2
1. Brake pedal cable joint
2. Slight play (0.1–0.5 mm [0.004–0.02 in])
6. Install the panel.
If the correct free play cannot be obtained, have a
Yamaha dealer adjust it.
TIP
When adjusting the rear brake pedal free play:
● Be sure not to step on the brake pedal.
● Make sure the rear brake lever and brake pedal
do not move.
8-51
1
8