Table of Contents
Advertisement
E – CLEANING AND MAINTENANCE
Cleaning and maintenance after every use;
✓ Make sure that the plug is not plugged in or the switch is turned off while cleaning the
device.
✓ Clean the surface of the device after each use.
✓ After each use, clean the oil etc. dirt on the inner surfaces of the oven using a degreasing
spray with a soft cloth before the appliance cools down completely.
✓ Open the inner glass of the door in order to clean the oil and sediments formed on the
oven lid glass. For this, open the lock mechanism at the top and bottom.
✓ Do not use abrasive cleaning chemicals as these can leave harmful residues.
✓ Do not use pressurized water and steam while cleaning the device.
✓ Do not clean the outer stainless surface of the device with cleaner that can scratch the
material such as wire wool.
✓ The device does not have any parts that can be repaired and maintained by the user. For
this reason, oil pot or tool kit will not be provided with the device.
Periodic cleaning and maintenance;
✓ Maintenance should be done by qualified person.
✓ Get the periodic maintenance of the appliance once in every 15 days.
✓ Check the oven interior light according to the frequency of use. To replace the lamp,
unscrew the right panel with a suitable screwdriver.
✓ According to the frequency of use, the electrical maintenance of the device should be done
by spraying dry air after the electrical connection is cut.
31
Advertisement
Table of Contents
