Table of Contents
Advertisement
A4 – UNPAKING
- Please unpack the package according to the security codes and ordinances of current
country and get rid from the pack. Parts which contacts with food are produced by stainless
steel. All plastic parts are marked by material's symbol.
- Please check that all parts of appliance had come completely and if they are damaged or
not during the shipping.
- After the installation of the device, please throw away of the packaging materials by paying
attention to safety and environmental conditions. For reuse of waste packages, throw them
into the relevant recycling bins according to their properties (foil, cardboard, Styrofoam).
When throw away of any electrical equipment, make it unusable by cutting the cable.
B – INSTALLATION
- Installation should be done by a qualified technician according to the instructions. Our
company cannot be held responsible for any damage to people, animals or property due to
incorrect installation.
- In case the device malfunctions, turn off the device. Only a service center authorized by
the manufacturer should service the device. Ask for original spare parts.
- The ground on which the device will be placed must be flat and it must be ensured that the
device operates on a scale. Take necessary precautions against the risk of the product
tipping over.
- Connection to the electrical power supply must be made by a competent person.
- Please be sure that the voltage connected to appliance must be equal with the voltage
which is on appliance's label.
- The ground connection of the device must be made in accordance with standards and
safety rules.
- The grounding of the device should be connected to the grounding line which is the closest
panel of electrical installation.
- Device electrical connection, main fuse and leakage current fuse must be made in
accordance with the current regulations and rules.
- In order for this device to be positioned close to the wall, kitchen furniture, decorative
covering, etc., if these are made of fireproof material or covered with a suitable non-flammable
heat insulation material, the distance between them must be at least 5 cm, otherwise 20 cm.
The device should be operated under a chimney hood.
28
Advertisement
Table of Contents
