Removal Of The Parts From The Drive Axle (Drive Axle With Square-Type End); Removal Of The Parts From The Drive Axle (Drive Axle With Spline-Type End); Removal Of The Controller Assembly - Yamaha X0S Series Service Manual

a
Drive axle, Motor
Removal of the parts from the drive axle
(drive axle with square-type end)
1. Remove the following parts:
• Locknut (Left-hand screw)
• Drive sprocket or spider
• Spacer (for sprocket only)
• Flanged bolt
Removal of the parts from the drive axle
(drive axle with spline-type end)
1. Remove the following parts:
• Screw
• Adapter
• Locknut (Left-hand screw)
• Spider
• Flanged bolt

Removal of the Controller Assembly

a
1. Separate the housing complete from the mo-
tor complete.
TIP
Separator ribs a are provided in 3 locations for
separating the housing complete.
NOTICE
a
• Take care not to scratch the mating sur-
faces of the housing complete and the mo-
tor complete with screwdrivers or other
tools.
• Take care not to damage the boards of the
controller assembly and the torque sensor
assembly with tools.
3-5
Drive
Unit