Hex Bolts; Flat Washers; Lock Nuts - Grizzly G0443HEP Manual

14. Pull off front cover of the switch box, remove
remote control and spare grommets, and
push front cover back on.
15. Mount switch on the stand, as shown in
Figure 14, with (2)
⁄ "-16 lock nuts, and (4)
3
8
Figure 14. Switch mounted to stand.
16. Secure vacuum hose inside upper and lower
stand legs with (2) U-shaped clips (see
Figure 15).
17. Complete Step 11 from the G0443 Owner's
Manual (see Page 18).
Figure 15. Securing vacuum hose to stand legs.
Model G0443HEP (Mfd. Since 12/17)
⁄ "-16 x ⁄

" hex bolts, (2)

3 3
8 4
⁄

" flat washers.

3
8
U-Shaped
Clips
18. Follow assembly instruction Steps 11–17 in
instruction manual.
19. Attach rubber gasket to top of HEPA filter
housing (see Figure 16), then secure filter
adapter to housing using (8)
bolts, and (8) ⁄ " flat washers.
5
16
Filter
Housing
Figure 16. Attaching filter adapter to filter
housing.
20. Attach rubber gasket to blower housing (see
Figure 17), then secure HEPA filter assem-
bly using (8) ⁄ "-16 x 1" hex bolts, (16)
3
8
washers, and (8) ⁄
3
8
Rubber Gasket
Figure 17. Attaching HEPA filter assembly to
blower housing.
⁄ "-18 x 1" hex
5
16
Filter Adapter
x 8
Rubber
Gasket
⁄ " flat
3
8
" hex nuts.
x 8
HEPA Filter
Assembly
-9-