Technical Data; Inserting/Replacing The Battery - Flex FHE 1-16 18.0-EC Original Operating Instructions

FHE 1-16 18.0-EC
This may significantly decrease the exposure
level over the total working period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and the
cutting accessories, keep the hands warm,
organisation of work patterns.
WARNING!
- that the vibration and noise emissions
during actual use of the power tool can
differ from the declared values depending
on the ways in which the tool is used
especially what kind of workpiece is
processed; and
- of the need to identify safety measures
to protect the operator that are based on
an estimation of exposure in the actual
conditions of use(taking account of all
parts of the operating cycle such as the
times when the tool is switched off and
when it is running idle in addition to the
trigger time).
CAUTION!
Wear ear defenders at a sound pressure
above 85 dB(A).

Technical data

Tool
Type
Rated voltage
No-load speed
Impact rate
Max. drill diameter
Drilling in wood
Drilling in meatal
Drilling in concrete
Impact energy
(according to "EPTA
procedure 05/2009")
Tool holder
Weight according
to"EPTA Procedure
01/2003" (without
battery)
Battery AP 2.5 AP 5.0 AP 8.0
FHE 1-16 18.0-EC
Rotary
hammer
Vdc 18
/min 0-810
/min 0-4500
mm 13
mm 8
mm 18
J 1.5
SDS-plus
kg 1.4
Weight of
0,42
battery/kg
Working
-10~40°C
Temperature
Charging
4~40°C
Temperature
Storage
<50°C
Temperature
Charger CA 10.8/18.0, CA 18.0-LD
Overview (see figure A)
The numbering of the product features refers
to the illustration of the machine on the
graphics page.
1 Function selector
2 Locking sleeve
3 LED worklight
4 Direction preselector switch (forward/
center-lock/reverse)
5 Variable-speed trigger switch
6 Soft grip
Instructions for use
Before switching on the power
tool
Unpack the power tool and accessories and
check that no parts are missing or damaged.
N OTE
The batteries are not fully charged on
delivery. Prior to initial operation, charge the
batteries fully. Refer to the charger operating
manual.

Inserting/replacing the battery

■ Press the charged battery into the power
tool until it clicks into place (see figure B).
■ To remove, press the release button (1.) and
pull out the battery (2.) (see figure C).
CAUTION!
When the device is not in use, protect the
battery contacts. Loose metal parts may short
circuit the contacts; explosion and fire hazard!
0,72 1,18
15