Alpine IVA-M700R Service Manual page 41

IVA-M700R
No. Symbol vo 'Terminal Description
a7 Kit
Fas | ki2
49 KI3 | | Key sean input terminal. (PULL-UP connect)
50 Kl4
51 Kis
52 | E2PROMCLK (NC) seas ian
53 | E2PROM DATA (NC)
54 P.CONT © | Power supply control terminal.
55 CHG IN LED © | CHG IN indicator control terminal,
56 VOL LED © } LED control signal terminal for discrimination display of operation VOLUME or ENTER.
57 SIMAL-LED © | SIMAL active indicator control terminal,
58 ACT-2 LED © | Shuttle active indicator control terminal for blue LED.
59 ACT-1 LED © | Shuttle active indicator control terminal.
60 RESET {| System reset signal input terminat.
61 REMOCON | | Remote control signal input terminal.
62 B-DET 1 | Compulsion STAND-BY detector signal input terminal.
63 F-STBY 1 | STAND-BY signal input lerminal from visual p -com.
64 F-TM 1 | Communication timing signal input terminal to visual ys -com.
65 CLOSE-SW | | Detector input terminal insert of monitor.
66 OPEN-SW | | Detector input terminal MAX. exhaust of monitor.
67 HOR-SW 1 | Detector input terminal horizontal angle of monitor,
68 Vop — | Power supply connect terminal.
69 x2 -
oa a ——| Crystal connect terminal. (4.19MHz)
7 Vpp (GND) — | GND connect terminal.
72 NG — | No connect terminal.
73 NC (GND) — | No connect terminal. (GND connect)
74 AVoD - [Analog power supply terminal of A/D converter,
B AVpEFO — | Reference voltage Input terminal of A/D converter.
76 NG — | No connect terminal.
Flies TEMP T | LCD temperature sensor input terminal .
78 ANG-LPS 1 | Detector input terminai Angle of monitor.
79 HOR-LPS 1 | Detector input terminat horizontal movement quantity of monitor.
80 H-MTRI {| Motor control terminal for movement to horizontal direction of monitor.
~—59—