Advertisement
If lost connection with outdoor transmitter
When the outdoor temperature and humidity digits show '---", the wireless
transmission is either interrupted or lost. Press and hold the
of the Wi-Fi Weather Station to restart signal searching from the outdoor
transmitter (the
placing the outdoor transmitter in a different location as extreme weather
may affect the transmission.
To synchronize additional outdoor sensor (maximum 3
units) with your Wi-Fi Weather Station
At the top of your weather station,
your outdoor temperature and humidity.
-
Press and hold
station is searching for the signal of another outdoor transmitter at
Channel 2.
-
Slide open the battery door of your second transmitter, slide the
switch to the middle position marked with 2, then insert two AAA
batteries into the battery compartment by observing the correct
+/- polarity.
-
Replace the battery cover.
-
The outdoor temperature and humidity of your second transmitter
will appear on the LCD together with
If the data still does not appear, take out and reinstall batteries to
your second transmitter once.
icon on display flashing). If still failed to connect, try
Press
once.
until the
icon blinks, your weather
P. 28
icon appears near
icon within few seconds.
button
Advertisement
