La Crosse Technology SW404 Instruction Manual page 23

9. Then press SET once again, hpa flash. Press
to select hpa or inHg.
10. Then press SET once again, 05 flash. Press
set the snooze duration from 5 minutes to 60 minutes.
11. Then press SET once again, ENG flash. Press
to select the language of ENG, GER, FRE, SPA, ITA, DUT, FIN, SWE.
12. Press SET once again to return to normal mode, or it will return to
normal mode in around 10 seconds if no further press of any other
buttons.
To set alarm 1 and 2 and 3
1. At normal time display mode, press and hold
digit 6 and
desired alarm time. Press and hold
setting.
2. Then press
or
Press and hold
3. Then press
button to select MON to SUN or MON to FRI or SAT to SUN alarm
mode.
4. Then press
flash. Repeat the step 1 to 3 to complete Alarm 2 and 3 setting.
flash. Press
once again, the alarm minute digits flash. Press
button to set the minutes of your desired alarm time.
or
once again, MON to SUN flash. Press
once again,
or to set the hours of your
or
will accelerate your setting.
displayed and the alarm hour digit
P. 23
or button
or button to
or button
, the alarm hour
will accelerate your
or